Welcome!

Maxim and NComm have a partnership that began over five years ago. It has grown to provide you with the best possible options for your telecommunication and datacommunication development projects. Whether you are looking for framers to go it alone, a turn key development, or anything in between, you have come to the right place.

      NComm TMS®
      Drivers
     Configuration
     Alarms
     Performance Monitoring
     Robbed Bit/CAS Signaling
     Automatic Protection Switching
     Primary Rate Interface (ISDN)
     Sync Status Message Mgmt

Years ago, Dallas recognized that the best way to serve you is for us all to do what we do best. Maxim knows how to design chips and they do it very, very well. While continuing to cover more and more of the WAN space, they continuously work to add more functionality to their silicon, reduce power and board space, and increase density to make your hardware more effective and efficient. The Dallas side of the partnership provides you with leading edge silicon solutions for efficient, cost effective T1 / E1 and T3 / E3 interfaces. They offer reference designs and application notes to speed your hardware to completion.

Free with many of the Dallas framers, line interface units (LIUs), and transceivers (framer + LIUs), you will also receive development grade software drivers (email Dallas Semiconductor's support group at telecom.support@dalsemi.com and request the free driver code for the product you are using) that are ready to use as-is in your project. These drivers were written by NComm and incorporate the perspective of engineers who develop commercial telecom and datacom systems just like you do. We are experts at creating finished, standard compliant offerings that hook up to the network.

The NComm side of the partnership takes the silicon expertise of Dallas-Maxim and adds extensive telecom/datacom product development expertise yielding the most complete WAN development solution available anywhere.  NComm adds to Dallas-Maxim to offer you the following:  

Off-the-shelf Trunk Management Software that completes the software for your project yielding a working, standard compliant interface including configuration, alarms, maintenance/performance monitoring and Channel Associated Signaling (CAS aka Robbed-bit) in 1-3 days after your hardware is up and debugged. It works. You don't have to debug it for us. It is designed to integrate very quickly. It is framer, RTOS and processor independent. And, it is more cost effective than rolling your own.

Custom hardware and software services to fill in for gaps in engineering resources or expertise. We can do anything from design reviews to turn-key projects.

  So, take a look. If you are interested in enhancing the bottom line impact of your project, you will like what you find!